General Specification Information

Specifications

Enclosures shall be structural foam molded polyofin plastic with ultra-violet additives ASTM-D-V1248
Box shall have adequate soil surface to prevent settling in firm soil
Lid to Box locking method shall be..
Pipe opening size and location shall be...
Cover marking shall be...
Product shall comply to ASTM-D-635 or UL-94 (Flammability of Plastic Articles)
Cover to have anti-skid surface

Ordering

Specify: Part Number, Color, Quantity, Lid Type
Pipe knockout location and size
Cover marking
"Ship to" and "Bill to" location

Freight

Freight Definitions	"Plastic Articles Expanded"	NMFC	157320
	* "Plastic Articles"	NMFC	156600
* As products vary greatly in size and density, freight is quoted at time of order. Generally products will ship class 92 - (10-12# per cu/ft.); or class 85 (12-15# per cu/ft.)

Physical & Chemical Properties

Description

Polyethylene
Impact Strength (12lb. wt, "C" tup)
Effect of Acids and Alkalies
Tensile Strength
Deflection Temp. @ 66 PSI
Flexural Modulus
Flammability (Horizontal cm/min)
Resistance To Ultra-Violet Light
Xenon-Arc 35@340nm

ASTM

D-1248
D-1244
D-543
D-638
D-648
D-790
D-635
G-26-92

Values

- - -
38 ft/lbs
Very Resistant
4415 PSI
159°
191,000 PSI
1.59 cm/min
7-9 Years

Plastic boxes should not be installed in concrete or asphalt without adequate rubber or FELT EXPANSION barriers.
Special product load data available on request.

[Back To Main]